2015model Crossrunner




Matt Gunpowder
Black Metallic

Pearl Glare White

Candy Arcadian Red

2015 Crossrunner Specifications
Type  Liquid-cooled 4-stroke 16-valve DOHC 90° V-4
Displacement  782cm3
Bore × Stroke  72 x 48mm
Compression Ratio  11.8 : 1
Max. Power Output  78kW/10,250min-1 (95/1/EC)
Max. Torque  75Nm/8,500min-1 (95/1/EC)
Idling Speed  1,200min-1
Oil Capacity  3.9 litres
Fuel System
Carburation  PGM-FI electronic fuel injection
Throttle Bore  36mm
Aircleaner  Oil-permeated, cartridge-type paper filter
Fuel Tank Capacity  20.8litres
Electrical System
Ignition System  Computer-controlled digital transistorised with electronic advance
Ignition Timing  8° BTDC (idle) 〜50° BTDC (1200min-1)
Sparkplug Type  IMR9D-9H (NGK); VNH27Z (DENSO)
Starter  Electric
Battery Capacity  12V/11AH (YTZ-12S)
ACG Output  427W
Headlight  LED (Hi-2/Low-2) with extension
Clutch  Wet, multiplate with coil springs
Clutch Operation  Hydraulic
Transmission Type  Constant mesh 6-speed
Primary Reduction  1.934 (64/33)
Gear Ratios      1 2.846 (37/13)
2 2.062 (33/16)
3 1.578 (30/19)
4 1.291 (31/24)
5 1.111 (30/27)
6 0.965 (28/29)
Final Reduction  2.687 (43/16)
Final Drive  O-ring sealed chain
Type  Diamond; aluminium twin-spar; pivotless
Dimensions (L×W×H) 2,190 x 870 x 1,360mm
Wheelbase  1,475mm
Caster Angle  26° 30'
Trail  103mm
Turning Radius  2.8m
Seat Height  835/815mm
Ground Clearance  165mm
Kerb Weight  242kg
Max. Carrying Capacity  -
Loaded Weight  -
Type  Front 43mm HMAS cartridge-type telescopic fork with stepless preload and
ten DF adjustment,131mm axle travel,145mm stroke
Rear Pro-Link with gas-charged HMAS damper, 35-step(remote-controlled hydraulic) preload and stepless rebound damping adjustment, 148mm axle travel
Type  Front 10-spoke cast aluminium
Rear 10-spoke cast aluminium
Rim Size  Front 17M/C x MT3.50
Rear 17M/C x MT5.50
Tyre Size  Front 120/70-R17M/C
Rear 180/55-R17M/C
Tyre Pressure  Front 225kPa
Rear 250kPa
Type  Front 310mm x 4.5mm dual floating hydraulic disc with radial 4-piston calipers, (*ABS)
and sintered metal pads
Rear 256mm x 6mm hydraulic disc with 2-piston caliper, (*ABS) and sintered metal pads
All specifications are provisional and subject to change without notice.

Copyright (C) 2013 Top Corporation. All Rights Reserved.