2013model CB600F/C-ABS




Mat Cynos Grey Metallic

Pearl Pacific Blue

Pearl Cool White

Matt White
2013 CB600F /C-ABS Specifications
Type  Liquid-cooled 4-stroke 16-valve DOHC inline-4
Displacement  599cm3
Bore × Stroke  67 × 42.5mm
Compression Ratio  12 : 1
Max. Power Output  75kW / 12,000min-1 (95/1/EC)
Max. Torque  63.5Nm / 10,500min-1 (95/1/EC)
Idling Speed  1,350min-1
Oil Capacity  3.5 litres
Fuel System
Carburation  PGM-FI electronic fuel injection
Throttle Bore  36mm
Aircleaner  Dry, cartridge-type paper filter
Fuel Tank Capacity  19 litres (including 4-litre LCD-indicated reserve)
Electrical System
Ignition System  Computer-controlled digital transistorised with electronic advance
Ignition Timing  10° BTDC (idle) 〜 60° BTDC (13,500min-1)
Sparkplug Type  CR9EH-9 (NGK); U27FER-9 (ND)
Starter  Electric
Battery Capacity  12V / 8.6AH
ACG Output  316W
Headlight  12V, 55W × 1 (low) / 55W × 1 (high)
Clutch  Wet, multiplate with coil springs
Clutch Operation  Mechanical; cable-actuated
Transmission Type  6-speed
Primary Reduction  2.111 (76/36)
Gear Ratios      1 2.750 (33/12)
2 1.938 (31/16)
3 1.556 (28/18)
4 1.348 (31/23)
5 1.208 (29/24)
6 1.095 (23/21)
Final Reduction  2.688 (43/16)
Final Drive  #525 O-ring sealed chain
Type  Mono-backbone; rectangular-section gravity die-cast aluminium
Dimensions (L×W×H) 2,150 x 740 x 1,075mm
Wheelbase  1,435mm
Caster Angle  25°
Trail  99mm
Seat Height  800mm
Ground Clearance  135mm
Kerb Weight  200.4kg (F: 100.2kg; R: 100.2kg)
Max. Carrying Capacity  188kg
Loaded Weight  388.4kg
Type  Front 41mm tension adjustable inverted HMAS cartridge-type telescopic fork, 120mm stroke
Rear Monoshock damper with 7-step adjustable preload and 128mm axle travel
Type  Front Hollow-section 5-spoke cast aluminium
Rear Hollow-section 5-spoke cast aluminium
Rim Size  Front 17M/C × MT3.50
Rear 17M/C × MT5.50
Tyre Size  Front 120/70 ZR17M/C (58W)
Rear 180/55 ZR17M/C (73W)
Tyre Pressure  Front 250kPa
Rear 290kPa
Type  Front 296 x 4.5mm dual hydraulic disc with dual-piston (*three piston) callipers, floating rotors (*ABS) and sintered metal pads
Rear 240 x 5mm hydraulic disc with single-piston calliper (*ABS) and sintered metal pads
* ABS version
All specifications are provisional and subject to change without notice.

Copyright (C) 2013 Top Corporation. All Rights Reserved.