2012model NC700X




Darkness Black Metallic

Magna Red

Digital Silver Metallic

Pearl Sunbeam White
2012 NC700X Specifications
Type  Liquid-cooled 4-stroke 8-valve, SOHC parallel 2-cylinder
Displacement  670cm3
Bore × Stroke  73 × 80mm
Compression Ratio  10.7 : 1
Max. Power Output  38.1kW/6,250min-1 (95/1/EC)
35kW/6,250min-1 (95/1/EC)
Max. Torque  *60Nm/4,750min-1 (95/1/EC)
Fuel System
Carburation  PGM-FI electronic fuel injection
Throttle Bore 36 mm
Aircleaner  5.8 litres
Fuel Tank Capacity  14.1 litres
Fuel Consumption
(WMTC of 35kW machine) 
MT 27.7 km/l (78.2mpg)
DCT 27.9 km/l (78.8mpg)
Fuel Consumption
(WMTC of 38.1kW machine)
MT 27.9 km/l (78.8mpg)
DCT 27.9 km/l (78.8mpg)
Electrical System
Ignition System  Computer-controlled digital transistorised with electronic advance
Ignition Timing  12° BTDC (idle) 〜 20° BTDC (6,600min-1)
Sparkplug Type  IFR6G-11K
Starter  Electric
Battery Capacity  12V-11AH
Headlight  12V; 60W × 1 (High) / 55W × 1 (Low)
Clutch  Wet, multiplate   * Wet multiplate, hydraulic 2-clutch
Clutch Operation  Manual   * D mode/S mode/Manual mode
Transmission Type  6-speed
Primary Reduction  1.731 DCT 1.921
Gear Ratios      1 2.812 DCT 2.666
2 1.894 DCT 1.904
3 1.454 DCT 1.454
4 1.200 DCT 1.200
5 1.033 DCT 1.033
6 0.837 DCT 0.837
Final Reduction  2.687 DCT 2.437
Final Drive  Chain
Type  Diamond; steel pipe
Dimensions (L×W×H) 2,210mm × 830mm × 1,285mm
Wheelbase  1,540mm
Caster Angle  27°
Trail  110mm
Turning Radius  3.0m
Seat Height  830mm
Ground Clearance  165mm
Kerb Weight  218kg   *228kg
Max. Carrying Capacity   209kg
Type  Front 41mm telescopic fork, 153.5mm travel
Rear Monoshock damper, Pro-Link swingarm, 150mm travel
Type  Front multi-spoke cast aluminium
Rear multi-spoke cast aluminium
Rim Size  Front 17M/C × MT 3.50
Rear 17M/C × MT 4.50
Tyre Size  Front 120/70-ZR17M/C(58W)
Rear 160/60-ZR17M/C(69W)
Tyre Pressure  Front 250kPa
Rear 290kPa
Type  Front 320mm single wavy hydraulic disc with 2-piston (* 3-piston) caliper and sintered metal pads
Rear 240 single wavy hydraulic disc with single-piston caliper and sintered metal pads
*DCT version
All specifications are provisional and subject to change without notice.