2012model CBF1000/C-ABS




Pearl Nightstar Black

Pearl Siena Red

Sword Silver Metallic

Pearl Cool White
2012 CBF1000/C-ABS Specifications
Type  Liquid-cooled 4-stroke DOHC inline-4
Displacement  998cm3
Bore × Stroke  75 × 56.5mm
Compression Ratio  11.2 : 1
Max. Power Output  79kW / 9,000min-1 (95/1/EC)
Max. Torque  96Nm / 6,500min-1 (95/1/EC)
Idling Speed  1,200min-1
Oil Capacity  3.6 litres
Fuel System
Carburation  PGM-FI
Throttle Bore  36mm
Aircleaner  Dry, cartridge-type paper filter
Fuel Tank Capacity  20 litres
Fuel Consumption  18.4km/l (WMTC Mode**)
Electrical System
Ignition System  Computer-controlled digital transistorised with electronic advance
Ignition Timing  5° BTDC (idle) 〜 45° BTDC (7,500min-1)
Sparkplug Type  IMR8C-9HES
Starter  Electric
Battery Capacity  12V / 8.6AH
ACG Output  350W / 5,000min-1
Headlight  12V, 55W × 1 (low) / 55W × 1 (high)
Clutch  Wet, multiplate with coil springs
Clutch Operation  Hydraulic
Transmission Type  6-speed
Primary Reduction  1.6
Gear Ratios      1 2.64
2 1.83
3 1.500
4 1.32
5 1.17
6 1.07
Final Reduction  2.687 (43/16)
Final Drive  #530 O-ring sealed chain
Type  Mono-backbone; cast aluminium
Dimensions (L×W×H) 2,210 × 780 × 1,220mm
Wheelbase  1,495mm
Caster Angle  26°
Trail  110mm
Turning Radius  2.9m
Seat Height  795mm ±15mm
Ground Clearance  135mm
Kerb Weight *245kg (F: 120kg; R: 125kg)
Max. Carrying Capacity  195kg
Loaded Weight *440kg
Type  Front 41mm free valve-type telescopic fork and adjustable spring; 120mm stroke
Rear Gas-charged HMAS damper and adjustable spring and rebound; 120mm axle stroke
Type  Front Hollow-section 6-spoke cast aluminium
Rear Hollow-section 6-spoke cast aluminium
Rim Size  Front 17M/C × MT3.50
Rear 17M/C × MT5.00
Tyre Size  Front 120/70 ZR17M/C (58W)
Rear 160/60 ZR17M/C (69W)
Tyre Pressure  Front 250kPa
Rear 290kPa (with passenger: 290kPa)
Type  Front 296 × 4.5mm dual hydraulic disc with 2-piston calipers, floating rotors, sintered metal pads (*3-piston calipers and Combined ABS)
Rear 240 x 5.0mm hydraulic disc with 1-piston caliper, sintered metal pads (*and Combined ABS)
*C-ABS version