2011model XL700V Transalp/C-ABS ED type



2011Transalp Specifications
Type  Liquid-cooled 4-stroke 8-valve SOHC 52° Vtwin
Displacement  680.2cm3
Bore × Stroke  81 × 66mm
Compression Ratio  10 : 1
Max. Power Output  44.1kW / 7,750min-1
Max. Torque  60Nm / 6,000min-1
Idling Speed  1,200min-1
Oil Capacity  2.9 litres
Fuel System
Carburation  PGM-FI electronic fuel injection
Throttle Bore  40mm
Aircleaner  Viscous, cartridge-type paper filter
Fuel Tank Capacity  17.5 litres (including 3-litre reserve)
Fuel Consumption  19.6km/l (WMTC mode**)
Electrical System
Ignition System  Digital transistorised with electronic advance
Ignition Timing  10° BTDC (idle) 〜 34.5° BTDC (7,750min-1)
Sparkplug Type  CPR8EA-9 (NGK); U24EPR9 (DENSO)
Starter  Electric
Battery Capacity  12V / 11.2AH
ACG Output  396W
Headlight  12V, 55W × 1 (low) / 55W × 1 (high)
Clutch  Wet, multiplate with coil springs
Clutch Operation  Mechanical; cable-actuated
Transmission Type  5-speed
Primary Reduction  1.763 (67/38)
Gear Ratios      1 2.500 (35/14)
2 1.722 (31/18)
3 1.333 (28/21)
4 1.111 (30/27)
5 0.961 (25/36)
Final Reduction  3.133 (47/15)
Final Drive  O-ring sealed chain
Type  Semi-double-cradle; box-section steel tube
Dimensions (L×W×H) 2,250 × 905 × 1,305mm
Wheelbase  1,515mm
Caster Angle  28° 23'
Trail  111mm
Turning Radius  2m
Seat Height  841mm
Ground Clearance  177mm
Kerb Weight  214kg (F: 101kg; R: 113kg), *219kg (F: 103kg; R: 116kg)
Max. Carrying Capacity  200kg
Loaded Weight  414kg, *419kg
Type  Front 41mm leading-axle telescopic fork, 177mm axle travel
Rear Pro-Link with adjustable compression damping, 173mm axle travel
Type  Front Aluminium rim/wire spoke
Rear Aluminium rim/wire spoke
Rim Size  Front 19M/C × MT2.15
Rear 17M/C × MT3.50
Tyre Size  Front 100/90 R19M/C (57H)
Rear 130/80 R17M/C (65H)
Tyre Pressure  Front 200kPa
Rear 200kPa (with passenger: 280kPa)
Type  Front 256 x 4mm dual hydraulic disc with dualpiston (*Combined three-piston) callipers (*ABS) and sintered metal pads
Rear 240 x 6mm hydraulic disc with (*Combined) single-piston calliper (*ABS) and sintered metal pads
* Please note that the figures provided are results obtained by Honda under standardised testing conditions prescribed by WMTC. Tests are conducted on a rolling road using a standard version of the vehicle with only one rider and no additional optional equipment. Actual fuel consumption may vary depending on how you ride, how you maintain your vehicle, weather, road conditions, tire pressure, installation of accessories, cargo, rider and passenger weight, and other factors. All specifications are provisional and subject to change without notice.