2011model VFR1200F/DCT ED type




Candy Prominence Red

Darkness Black Metallic / Digital Silver Metallic

Pearl Sunbeam White

Seal Silver Metallic
2011 VFR1200F Specifications
Type  Liquid-cooled 4-stroke UNICAM 76° V-4
Displacement  1,237cm3
Bore × Stroke  81 × 60mm
Compression Ratio  12 : 1
Max. Power Output  127kW / 10,000min-1 (95/1/EC)
Max. Torque  129Nm / 8,750min-1 (95/1/EC)
Idling Speed  1050-1250min-1
Oil Capacity  4 litres
Fuel System
Carburation  PGM-FI electronic fuel injection
Throttle Bore 
Aircleaner  Oil-permeated, viscous-type paper filter
Fuel Tank Capacity  18.5 litres
Fuel Consumption  14.8km/l (WMTC mode*)
Electrical System
Ignition System  Computer-controlled digital transistorised with electronic advance
Ignition Timing  6.4° 〜 10.4° BTDC (idle speed)
Sparkplug Type  IMR9E-9HES (NGK); VUH27ES (DENSO)
Starter  Electric
Battery Capacity  12V / 11.6AH (YTZ14)
ACG Output  560W
Headlight  12V, 55W × 1 (low) / 55W × 1 (high)
Clutch  Wet, multiplate slipper type
Clutch Operation  Hydraulic
Transmission Type  Constant mesh 6-speed
Primary Reduction  1.738 (73/42)
Gear Ratios      1 2.6000 (39/15)
2 1.7368 (33/19)
3 1.3636 (30/22)
4 1.1600 (29/25)
5 1.0322 (32/31)
6 0.9393 (31/33)
Final Reduction  2.7
Final Drive  Shaft
Type  Diamond; aluminium twin-spar
Dimensions (L×W×H) 2,250 × 755 × 1,220mm
Wheelbase  1,545mm
Caster Angle  25.5°
Trail  101mm
Turning Radius  3.5m
Seat Height  815mm
Ground Clearance  125mm
Kerb Weight  267kg
Max. Carrying Capacity 
Loaded Weight  463kg
Type  Front 43mm cartridge-type telescopic fork with stepless preload adjustment, 120mm axle travel
Rear Pro-Link with gas-charged damper, 25-step (*stepless remote-controlled hydraulic) preload and stepless rebound damping adjustment, 130mm axle travel
Type  Front 5-spoke hollow gravity die cast aluminium
Rear 7-spoke gravity die cast aluminium
Rim Size  Front 17M/C × MT3.50
Rear 17M/C × MT6.00
Tyre Size  Front 120/70 ZR17M/C (58W)
Rear 190/55 ZR17M/C (75W)
Tyre Pressure  Front 250kPa
Rear 290kPa
Type  Front 320mm dual floating hydraulic disc with two 6-piston calipers, C-ABS and sintered metal pads
Rear 276mm hydraulic disc with 2-piston caliper, C-ABS and sintered metal pads
* Please note that the figures provided are results obtained by Honda under standardised testing conditions prescribed by WMTC. Tests are conducted on a rolling road using a standard version of the vehicle with only one rider and no additional optional equipment. Actual fuel consumption may vary depending on how you ride, how you maintain your vehicle, weather, road conditions, tire pressure, installation of accessories, cargo, rider and passenger weight, and other factors.
All specifications are provisional and subject to change without notice.