2011model NT700V Deauville/C-ABS ED type




Carnelian Red

Pearl Concours Black

Shasta White

Spangle Silver Metallic
2011 NT700V Deauville/C-ABS Specifications
Type  Liquid-cooled 4-stroke 8-valve SOHC 52° Vtwin
Displacement  680cm3
Bore × Stroke  81 × 66mm
Compression Ratio  10 : 1
Max. Power Output  48.3kW / 8,000min-1 (95/1/EC)
Max. Torque  66.2Nm / 6,500min-1
Idling Speed  1,200min-1
Oil Capacity  3.2 litres
Fuel System
Carburation  PGM-FI electronic fuel injection
Throttle Bore  40mm
Aircleaner  Dry, cartridge-type paper filter
Fuel Tank Capacity  19.7 litres (including 3.5-litre reserve)
Fuel Consumption  20.1km/l (WMTC Mode*)
Electrical System
Ignition System  Digital transistorised with electronic advance
Ignition Timing  10° BTDC (idle) 〜 45° BTDC (8,900min-1)
Sparkplug Type  DPR8EA-9 (NGK)
Starter  Electric
Battery Capacity  12V / 11.2AH
ACG Output  438W
Headlight  12V, 55W × 1 (low) / 55W × 1 (high)
Clutch  Wet, multiplate with coil springs
Clutch Operation  Mechanical; cable-actuated
Transmission Type  5-speed
Primary Reduction  1.763 (67/38)
Gear Ratios      1 2.571 (36/14)
2 1.688 (27/16)
3 1.300 (26/20)
4 1.084 (29/27)
5 0.923 (24/26)
Final Reduction  3.091 (34/11)
Final Drive  Enclosed shaft
Type  Diamond; steel twin-spar
Dimensions (L×W×H) 2,218 × 810 × 1,320mm (Raised windscreen: 1,491mm)
Wheelbase  1,476mm
Caster Angle  28° 50'
Trail  115mm
Turning Radius  3.2m
Seat Height  805mm
Ground Clearance  156mm
Kerb Weight  254kg (F: 112kg; R: 142kg), *257kg (F: 113kg; R: 144kg)
Max. Carrying Capacity 197kg
Loaded Weight  451kg , *454kg
Type  Front 41mm telescopic fork, 115mm axle travel
Rear Single damper with adjustable preload,122.5mm axle travel
Type  Front S-section triple-spoke cast aluminium
Rear S-section triple-spoke cast aluminium
Rim Size  Front 17 × MT3.50
Rear 17 × MT4.50
Tyre Size  Front 120/70 ZR17 (58W)
Rear 150/70 ZR17 (69W)
Tyre Pressure  Front 250kPa
Rear 290kPa (with passenger: 290kPa)
Type  Front 296 × 4.5mm dual hydraulic disc with Combined 3-piston calipers and sintered metal pads
Rear 276 × 6mm hydraulic disc with dual-piston caliper and sintered metal pads
* Please note that the figures provided are results obtained by Honda under standardised testing conditions prescribed by WMTC. Tests are conducted on a rolling road using a standard version of the vehicle with only one rider and no additional optional equipment. Actual fuel consumption may vary depending on how you ride, how you maintain your vehicle, weather, road conditions, tire pressure, installation of accessories, cargo, rider and passenger weight, and other factors. All specifications are provisional and subject to change without notice.