2011 CBR1000RR/C-ABS Specifications |
Engine |
Type |
Liquid-cooled 4-stroke 16-valve DOHC
inline-4 |
Displacement |
999cm3 |
Bore × Stroke |
76 × 55.1mm |
Compression Ratio |
12.3 : 1 |
Max. Power Output |
131.0kW / 12,000min-1 |
Max. Torque |
112.0Nm / 8,500min-1 |
Idling Speed |
1,200min-1 |
Oil Capacity |
3.7 litres |
Fuel System |
Carburation |
PGM-DSFI electronic fuel injection |
Throttle Bore |
46mm |
Aircleaner |
Dry, Panel-type paper filter |
Fuel Tank Capacity |
17.7 litres (including 4-litre LCD-indicated
reserve) |
Fuel Consumption |
16.9km/l (WMTC Mode*) |
Electrical System |
Ignition System |
Computer-controlled digital transistorised with
electronic advance |
Ignition Timing |
3.2° BTDC (idle) 〜 45° BTDC
(7,500min-1) |
Sparkplug Type |
IMR9E-9HES (NGK); VUH27EC (DENSO) |
Starter |
Electric |
Battery Capacity |
12V / 6AH |
ACG Output |
372W |
Headlight |
12V, 55W × 1 (low) / 55W × 2 (high) |
Drivetrain |
Clutch |
Wet, multiplate with diaphragm spring |
Clutch Operation |
Mechanical; cable-actuated |
Transmission Type |
6-speed |
Primary Reduction |
1.717 (79/46) |
Gear Ratios |
1 |
2.286 (32/14) |
2 |
1.778 (32/18) |
3 |
1.500 (33/22) |
4 |
1.333 (32/24) |
5 |
1.214 (34/28) |
6 |
1.138 (33/29) |
Final Reduction |
2.625 (42/16) |
Final Drive |
#530 O-ring sealed chain |
Frame |
Type |
Diamond; aluminium composite twin-spar |
Chassis |
Dimensions (L×W×H) |
2,075 × 685 × 1,130mm |
Wheelbase |
1,410mm |
Caster Angle |
23° 18' |
Trail |
96.3mm |
Turning Radius |
3.2m |
Seat Height |
820mm |
Ground Clearance |
130mm |
Kerb Weight |
199kg (F: 105kg; R: 94kg) |
Max. Carrying Capacity |
180kg |
Loaded Weight |
379kg |
Suspension |
Type |
Front |
43mm inverted HMAS cartridge-type telescopic fork with
stepless preload,compression and rebound adjustment,120mm stroke |
Rear |
Unit Pro-Link with gas-charged HMAS damper featuring
10-step preload and stepless compression and rebound damping adjustment, 135mm
stroke |
Wheels |
Type |
Front |
Hollow-section triple-spoke cast aluminium |
Rear |
Hollow-section triple-spoke cast aluminium |
Rim Size |
Front |
17M/C × MT3.50 |
Rear |
17M/C × MT6.00 |
Tyre Size |
Front |
120/70 ZR17M/C (58W) |
Rear |
190/50 ZR17M/C (73W) |
Tyre Pressure |
Front |
250kPa |
Rear |
290kPa |
Brakes |
Type |
Front |
320 x 4.5mm dual hydraulic disc with 4-piston calipers
and sintered metal pads |
Rear |
220 x 5mm hydraulic disc with single-piston caliper
and sintered metal pads |
* Please note that the figures provided are results obtained by
Honda under standardised testing conditions prescribed by WMTC. Tests are
conducted on a rolling road using a standard version of the vehicle with only
one rider and no additional optional equipment. Actual fuel consumption may vary
depending on how you ride, how you maintain your vehicle, weather, road
conditions, tire pressure, installation of accessories, cargo, rider and
passenger weight, and other factors.
All specifications are provisional and
subject to change without notice. |