2011 CBF1000/C-ABS Specifications |
Engine |
Type |
Liquid-cooled 4-stroke DOHC inline-4 |
Displacement |
998cm3 |
Bore × Stroke |
75 × 56.5mm |
Compression Ratio |
11.2 : 1 |
Max. Power Output |
79kW / 9,000min-1 (95/1/EC) |
Max. Torque |
96Nm / 6,500min-1 (95/1/EC) |
Idling Speed |
1,200min-1 |
Oil Capacity |
3.6 litres |
Fuel System |
Carburation |
PGM-FI |
Throttle Bore |
36mm |
Aircleaner |
Dry, cartridge-type paper filter |
Fuel Tank Capacity |
20 litres |
Fuel Consumption |
18.4km/l (WMTC Mode**) |
Electrical System |
Ignition System |
Computer-controlled digital transistorised with
electronic advance |
Ignition Timing |
5° BTDC (idle) 〜 45° BTDC
(7,500min-1) |
Sparkplug Type |
IMR8C-9HES |
Starter |
Electric |
Battery Capacity |
12V / 8.6AH |
ACG Output |
350W / 5,000min-1 |
Headlight |
12V, 55W × 1 (low) / 55W × 1 (high) |
Drivetrain |
Clutch |
Wet, multiplate with coil springs |
Clutch Operation |
Hydraulic |
Transmission Type |
6-speed |
Primary Reduction |
1.6 |
Gear Ratios |
1 |
2.64 |
2 |
1.83 |
3 |
1.500 |
4 |
1.32 |
5 |
1.17 |
6 |
1.07 |
Final Reduction |
2.687 (43/16) |
Final Drive |
#530 O-ring sealed chain |
Frame |
Type |
Mono-backbone; cast aluminium |
Chassis |
Dimensions (L×W×H) |
2,210 × 780 × 1,220mm |
Wheelbase |
1,495mm |
Caster Angle |
26° |
Trail |
110mm |
Turning Radius |
2.9m |
Seat Height |
795mm (±15mm) |
Ground Clearance |
135mm |
Max. Carrying Capacity |
195kg |
Suspension |
Type |
Front |
41mm free valve-type telescopic fork and adjustable
spring; 120mm stroke |
Rear |
Gas-charged HMAS damper and adjustable spring and
rebound; 120mm axle stroke |
Wheels |
Type |
Front |
Hollow-section 6-spoke cast aluminium |
Rear |
Hollow-section 6-spoke cast aluminium |
Rim Size |
Front |
17M/C × MT3.50 |
Rear |
17M/C × MT5.00 |
Tyre Size |
Front |
120/70 ZR17M/C (58W) |
Rear |
160/60 ZR17M/C (69W) |
Tyre Pressure |
Front |
250kPa |
Rear |
290kPa (with passenger: 290kPa) |
Brakes |
Type |
Front |
296 x 4.5mm dual hydraulic disc with 2-piston
calipers, floating rotors, sintered metal pads (*3-piston calipers and Combined
ABS) |
Rear |
240 x 5.0mm hydraulic disc with 1-piston caliper,
sintered metal pads (*and Combined ABS) |
* Please note that the figures provided are results obtained by
Honda under standardised testing conditions prescribed by WMTC. Tests are
conducted on a rolling road using a standard version of the vehicle with only
one rider and no additional optional equipment. Actual fuel consumption may vary
depending on how you ride, how you maintain your vehicle, weather, road
conditions, tire pressure, installation of accessories, cargo, rider and
passenger weight, and other factors.
All specifications are provisional and
subject to change without notice. |