2011model CB1000R/C-ABS ED type




Pearl Cool White

Pearl Nightstar Black

2011CB1000R/C-ABS Specifications
Type  Liquid-cooled 4-stroke 16-valve DOHC inline-4
Displacement  998cm3
Bore × Stroke  75 × 56.5mm
Compression Ratio  11.2 : 1
Max. Power Output  92kW / 10,000min-1(95/1/EC)
Max. Torque  99Nm / 7,750min-1(95/1/EC)
Idling Speed  1,200min-1
Oil Capacity  3.6 litres
Fuel System
Carburation  PGM-FI electronic fuel injection
Throttle Bore  36mm
Aircleaner  Dry, cartridge-type paper filter
Fuel Tank Capacity  17 litres (including 4-litre LCD-indicated reserve)
Fuel Consumption  17km/l (WMTC Mode*)
Electrical System
Ignition System  Computer-controlled digital transistorised with electronic advance
Ignition Timing  5° BTDC (idle) 〜50° BTDC (10000min-1)
Sparkplug Type  NGK: IMR9E-9HES (NGK); VUH27ES (DENSO)
Starter  Electric
Battery Capacity  12V / 8.6AH
ACG Output  340W
Headlight  12V, 55W × 1 (low) / 60W × 1 (high)
Clutch  Wet, multiplate with coil springs
Clutch Operation  Hydraulic
Transmission Type  6-speed
Primary Reduction  1.604 (77/48)
Gear Ratios      1 2.538 (33/13)
2 1.941 (33/17)
3 1.579 (30/19)
4 1.363 (30/22)
5 1.217 (28/23)
6 1.115 (29/26)
Final Reduction  2.750 (44/16)
Final Drive  #530 O-ring sealed chain
Type  Mono-backbone; cast aluminium
Dimensions (L×W×H) 2,105 × 805 × 1,095mm
Wheelbase  1,445mm
Caster Angle  25°
Trail  98.7mm
Turning Radius  2.8m
Seat Height  825mm
Ground Clearance  130mm
Kerb Weight  217kg (F: 106kg; R: 111kg), *222kg (F: 108kg; R: 114kg)
Max. Carrying Capacity  188kg
Loaded Weight  405kg , *410kg
Type  Front 43mm inverted HMAS cartridge-type telescopic fork with stepless preload,compression and rebound adjustment,120mm cushion stroke
Rear Monoshock with gas-charged HMAS damper featuring 10-step preload and stepless rebound damping adjustment, 128mm axle travel
Type  Front Hollow-section 4-spoke cast aluminium
Rear U-section 4-spoke cast aluminium
Rim Size  Front 17M/C x MT3.50
Rear 17M/C x MT5.50
Tyre Size  Front 120/70 ZR17M/C (58W)
Rear 180/55 ZR17M/C (73W)
Tyre Pressure  Front 250kPa
Rear 290kPa (with passenger: 290kPa)
Type  Front 310 x 4.5mm dual hydraulic disc with 4-piston (**Combined 3-piston) calipers, floating rotors (**ABS) and sintered metal pads
Rear 256 x 5mm hydraulic disc with dual-piston caliper (**ABS) and sintered metal pads
All specifications are provisional and subject to change without notice.
* Please note that the figures provided are results obtained by Honda under standardised testing conditions prescribed by WMTC. Tests are conducted on a rolling road using a standard version of the vehicle with only one rider and no additional optional equipment. Actual fuel consumption may vary depending on how you ride, how you maintain your vehicle, weather, road conditions, tire pressure, installation of accessories, cargo, rider and passenger weight, and other factors.
** ABS version